Windows error reference_by_pointer

Step 1: Right-click on the start menu button and then click on the Command Prompt Admin button. Step 2: Enter the following command lines in order and then press Enter at the end of each line:. Many users reported that PC overheating was another reason for the error of reference by the pointer.

Check the temperature every time your PC faces this issue. Besides, cleaning the dust in the CPU might help you solve this issue. Incompatible hardware can also be the cause of this Blue Screen of Death error. If you have recently installed new hardware before running into this issue, the reason for it may be that the hardware is incompatible with the computer.

In this case, remove or replace the hardware. After that, reboot your PC and check whether the issue is solved. Losing data is a common and tricky problem vexing many computer users.

But with the help of Bitwar Data Recovery , you can easily restore whatever data you have lost. If you have lost your unsaved files due to the error of reference by pointer, this tool is going to help you cope with it. Besides, it does not make any changes to the lost data. Refer to the following steps to learn how it works. Step 1 : Visit our official website, download Bitwar Data Recovery, and then install it. Step 2 : Open the program and select the drive where your missing data was stored and then click on Next.

Step 3 : Select a scan mode in this phase. We would like to recommend Quick Scan , which can recover a healthy number of lost files. If it fails to work, you could run the program again and use a Deep scan , which is more effective. Step 4 : Select the types of data you want to recover and then click on Next. Step 5 : Preview wanted files to check their intactness. Under the "Selective Startup" section, you may uncheck the "Load startup items" option.

Step 3: Now, open the "Services" tab and check the "Hide all Microsoft services" option. And then, click on the "Disable All" option. Step 7: Restart the computer and check if the issue is solved. If the problem is not there, this indicates the problem is with software. Find out the software and remove it. Stop code reference by a pointer can also occur when your antivirus interferes with your computer. To check that, disable your antivirus first. Check if the problem is solved.

However, if the stop error persists, you may remove the antivirus software. Use a dedicated uninstaller to perform the task. Once the antivirus software is uninstalled, check if the issue is solved. If you see that uninstalling the software has solved the problem, change the software hereafter. Besides, if your computer has any third-party antivirus software, uninstall it. And check if that solves the issue. In some cases, when the computer is updated to Windows 10, the stop error might occur.

It indicates that Windows image files are corrupted. It can happen during the updating process. In this case, SFC would not work. You have to run the DISM command.

Step 3: This will detect problematic windows image files and repair them. Once the process is finished, restart the computer and check if the problem is solved. Then, restart your computer and check if this method works. In some cases, this reference by pointer BSOD error comes up after the computer is updated to Windows If the SFC scan doesn't work to fix the error, chances are that your Windows image files get corrupted during the update.

To fix the issue, you need to execute the DISM command which can effectively repair faulty image files. Once the scanning process is finished, reboot your Windows and check if the error has been resolved.

Once the CPU temperature goes above a certain value, your computer might crash down. So, you are strongly recommended to check the temperature of your PC if it runs into the problem. You can ask certain CPU temperature monitor program for help. If your computer is detected to be overheating, you might need to clean the PC from dust, which has helped some users fix the issue effectively.

Just disconnect the power outlet, open the computer case, and use the pressurized air to clean the components. It is true that many blue screen of death errors are caused by hardware issue.

So, you might need to pay attention to your hardware if you get the stop code reference by pointer. If you have installed any new hardware right before the error occurs, you can try removing it. Once the error disappears without this new hardware, you might need to replace it with the original or new one, or contact its manufacturer to get solutions.

But before that, you should recover the important data to a safe place at first. To recover data from the computer with reference by pointer issue, you might need a professional third-party program. MiniTool Partition Wizard should be a good assistant for you. As you are unable to access the Desktop normally, you need to purchase the bootable edition of MiniTool Partition Wizard to restore data in the Windows Recovery Environment.

Thanks to MiniTool Partition Wizard, I have recovered the data on the disk, which is rather important for me! Click to tweet. Buy Now. In a past life, Ben was a college lecturer in the UK, training teens and adults. Since leaving the classroom, Ben has taken his teaching experience and applied it to writing tech how-to guides and tutorials, specialising in Linux, Windows, and Android.

He has a degree in History and a postgraduate qualification in Computing. Read Ben's Full Bio. We hate spam too, unsubscribe at any time. Table of Contents. Subscribe on YouTube!